Spinning process of stainless steel kitchen equipment in Jiangsu hotels

On the whole, the spinning process of Jiangsu hotel stainless steel kitchen equipment is an advanced special process compared with the traditional stamping process. In detail, the production cycle of spinning process is relatively short, and the production flexibility is large. It is especially suitable for the production of small and medium batches and complex busbar rotor parts. Because the spinning process has these advantages, it integrates the processes of extrusion, stretching, play, circling, horizontal tying and rolling, so that the shape and wall thickness of the workpiece can be modified to make the desired product. The manufacturing process of the spinning process is to place the rough pottery on the core mold, install the core mold hydraulically, and maintain the rotation at a certain speed. The friction force at the contact end is generated under the thrust of the rotary wheel, and the torque is transmitted through the workpiece wall to finally reach the request of the process. Compared with the stamping process, the mold of the spinning process is relatively simple, and it can manufacture relatively complex rotating parts. Jiangsu Hotel Stainless Steel Kitchen Equipment 1. Compared with other tools, the stamping tools are more interchangeable and versatile, and the molds are simple. After comparison, it can be concluded that some excessive deformations based on stamping processing will lead to molds. Waste, which will increase manufacturing costs, and spinning tools can reduce consumption costs to a certain level and improve the efficiency of stainless steel kitchen equipment manufacturers. Compared with other processes, spinning processing has a higher level of consumption safety, a better consumption environment, almost no vibration, fast and convenient product updates, and it can also manufacture products with more complex consumption characteristics. The mold is relatively simple, so the data application rate is high. . Due to the high breakage rate of the stamping and drawing parts, the spinning process has improved the consumption technology, and the surface strength of the stainless steel kitchen utensils is higher, which reduces the probability of scratches on the surface. 2. Process parameters The spinning process parameters of Jiangsu Hotel stainless steel kitchen equipment include the following points: First of all, for the spindle speed, it has little effect on the spinning process, which not only improves the consumption rate, but also reduces the roughness of the parts. Secondly, with regard to the feed rate, the feed rate of the spinning part die can be well controlled on the progress of the part size, the surface roughness and the spinning force. As the core mold makes one revolution, the spinning wheel follows the core. The movement of the mold bus bar can greatly reduce the roughness of the surface. Thirdly, as far as the spinability is concerned, the spinning process can not only reduce the resistance of the equipment to high deformation, but also make the given material withstand spinning without causing defects such as partial instability and wrinkling, and try to prevent partial instability. . Then for the angle of the rotating wheel device, the angle of the device should not be too large. A reasonable device angle can prevent the front edge of the rotating wheel from being pressed into the workpiece too deeply, resulting in a rough appearance. Comparing the stainless steel kitchen equipment of Jiangsu hotel with ordinary pressure processing methods, the advantage of spinning processing of Jiangsu stainless steel kitchen equipment is that it reduces the required deformation force. In recent years, with the continuous improvement of the spinning process, it has produced better The performance of the spinning process is improved based on the possible defects of the spinning function, which further improves the consumption technology and further reduces the consumption cost of the enterprise. Previous post: What are the kitchen equipment in Jiangsu hotels?