Restaurant Kitchen Setup Checklist Before You Buy Equipment
Two dishwashers can occupy the same spot on a drawing and need different electrical and water supplies. A restaurant kitchen setup checklist connects the menu, equipment schedule and measured site so the buyer can see which items are ready to order.
Specify the equipment that shapes the kitchen first. The cooking line, refrigeration and dishwashing usually set the starting points for space and services. Confirm each fixed item’s exact configuration, utility connections and delivery route before ordering. Finalise the benches, shelving and smallwares around the confirmed layout.
- Define the work Menu, peak orders and dirty dish return.
- Match equipment to the site Models, service points and access.
- Confirm the order Use the same drawing and schedule revision.
Turn the opening menu into a kitchen equipment list
Take the busiest 30 minutes you expect to serve and break those orders down by station. If you expect 24 orders and 15 include fries, the fryer and its landing bench need to support 15 portions in that window. Check when those orders arrive, how much a basket can cook at your target quality and what else shares the fryer. Carry that same service window through plating, takeaway packing and dish return.
Walk a delivery from receiving to storage, prep, cooking and service. Then walk a tray of dirty dishes back from the dining room. Add the items each step needs to work together. A pass-through dishwasher, for example, also needs room to sort and load dirty racks and room for clean racks to land.
| Zona | Specify together | Check before ordering |
|---|---|---|
| Cocción | Menu-specific appliances, landing space and extraction. | Exact fuel or electrical version, hood coverage and service access. |
| Cold storage and prep | Bulk storage, line refrigeration and prep worktops. | Usable capacity, door swing, airflow and delivery path. |
| Lavado de vajilla | Scrape and pre-rinse area, washer, tables and racks. | Wash direction, rack size, water supply, drain position and clean landing space. |
| Benches and shelving | Worktops, shelves and mobile racks sized for the work. | Finished wall dimensions and the space left by doors, panels and service points. |
Use one equipment schedule for purchasing and site work
Assign each item a tag on both the floor plan and the equipment schedule. For a fixed item, record the model and options, installed and transport dimensions, door and service space, connection locations and the manufacturer’s drawing revision. Include the accessories the model needs to run, such as its stand, dish racks or specified water treatment.
Ask the site trades to mark each required service as verified on site, confirmed in the works o open. For a restaurant takeover, have them check what each retained connection can supply. For an empty shell, record the contractor responsible and the agreed position on the services drawing. The schedule and drawings give suppliers and installers a shared reference for proposed substitutions. FDA food establishment plan review guidance.
Use the current installation sheet for the selected model and configuration. Manufacturer documentation distinguishes installation and service space from the transport envelope. Check the tightest point on the entire route, including turns, thresholds and any lift. Use the clear opening after the door, hardware and finishes are in place. Manufacturer example of transport and placement guidance.
Check working aisles with appliance doors open and staff using the nearby benches. GRACE commercial kitchen size guide.
Can a different dishwasher go on the same order?
A proposed replacement fits the bench opening shown on the layout. The supplier’s packed width is 800 mm and the narrowest finished doorway is 780 mm. In the proposed upright transport orientation, the package is 20 mm too wide before any handling allowance. The replacement is also a three-phase configuration and the retained point is single-phase. These are illustrative dimensions and supply configurations.
Keep the dishwasher line item open. Ask the supplier and delivery team for an approved route or transport configuration, and have the electrician confirm a suitable supply or review an alternative model. Check the new model’s water and drain requirements, rack size and table connections before updating the drawing. Once the affected teams confirm the same revision, release that item for purchase.
What can you order first?
Release equipment that the kitchen depends on as each item’s site checks close. Batch compatible orders if they share a footprint or connection detail, such as a dishwashing machine and its tables. Order fixed stainless worktops after finished dimensions and adjoining equipment are confirmed. Buy compatible pans, racks and smallwares from the approved station list, with quantities tied to the opening menu and replenishment plan.
Before opening, run a representative service with the team. Track a busy wave of tickets from prep to the pass and send the corresponding plates back through the dish area. Record where staging, utensils or replenishment slow work so the team can adjust the setup before the first full service.
Plan your restaurant kitchen with GRACE
Share your menu, peak order window, measured plan and any retained services. GRACE can coordinate the layout and equipment schedule, manufacture and supply commercial kitchen equipment, and arrange on-site installation as part of the agreed project scope. Discuss your kitchen setup with GRACE.