Sourcing & Buying Guide

Heat Recovery Commercial Dishwashers: When Is the Upgrade Worth It?

HOTEL KITCHEN EQUIPMENT

Two door-type dishwashers can clear the same dinner service and leave the hotel with very different installation and operating costs. Start with the number of racks you actually wash, then compare the installed price and the energy used to heat the rinse water.

Quick answer. Ask for a heat recovery option when your hotel washes racks steadily across several services or is planning a dishroom refurbishment. Check that the model clears the busiest return window first. Then compare the installed premium with annual savings at your own tariff.

What a heat recovery dishwasher does

A heat exchanger transfers heat from exhaust vapour or outgoing drain water into the incoming fresh water. The final rinse heating system then has a smaller temperature rise to cover. A model may recover heat from one or both sources. Ask the supplier which recovery system is included in the quoted configuration and for the inlet temperature range it requires.

  1. 1. Capture Exhaust vapour or outgoing drain water carries usable heat.
  2. 2. Transfer The heat exchanger warms incoming fresh water.
  3. 3. Finish heating The rinse heating system brings the water to the required operating temperature.
Concept diagram. The heat source and water connections depend on the model.

For example, HOBART describes exhaust heat recovery and drain-water heat recovery separately in its door-type dishwasher literature. When comparing two quotes, use the exact model and option code to identify the recovery system you are buying. HOBART technical documentation.

Check the banquet return before sizing the machine

Count racks at breakfast, lunch, dinner and banquet breakdown. Record crockery, glassware and trays separately if they use different racks or programs. For operating costs, use a representative daily average and the number of operating days. For capacity, measure the busiest return window.

Suppose a hotel needs to clear 96 racks in two hours. It needs an average of 48 racks per hour across that window. Jackson, for example, lists 41 racks per hour for its TempStar VER. That published capacity is below the example requirement. Check the quoted rack rate with heat recovery active, then allow for sorting, loading, program changes and unloading. If your busiest return is concentrated in 30 minutes, size the staging and wash line around that shorter window too. Jackson TempStar VER specifications.

Calculate payback from your own rack count

Compare a standard and a heat recovery machine that can meet the same workload and sanitising method. Request comparable wash and idle energy figures and final rinse water use. Use the same inlet temperature, operating hours and rack count. If one quote moves part of the heating to the building’s hot-water system, include that cost in the comparison. ENERGY STAR provides a useful reference for comparing tested energy and water metrics. ENERGY STAR commercial dishwashers.

Worked example. Assume a fully electric comparison, an installed price premium of US$2,400, an energy difference attributable to washing of 0.10 kWh per rack, electricity at US$0.18/kWh, 360 operating days per year and US$120 per year of additional maintenance. These are illustrative inputs. Assume equal idle energy, water costs and ventilation costs for this example.

  1. Annual electricity saving = daily racks × operating days × kWh saved per rack × electricity price.
  2. Annual net saving = annual electricity saving − additional annual maintenance.
  3. Simple payback in years = installed price premium ÷ annual net saving.
How daily rack count changes payback in the example
Racks per dayGross energy saving per yearNet saving per yearSimple payback
60US$388.80US$268.808.93 years
120US$777.60US$657.603.65 years
200US$1,296.00US$1,176.002.04 years

At 120 racks a day, the example saves 4,320 kWh per year. A hotel targeting four years or less would need an average of about 112 racks per operating day under the same assumptions, rounded up to a whole rack. The 200-rack row illustrates annual utilisation. The busiest service still determines the capacity you need.

If the options have different idle consumption, hot-water costs or exhaust requirements, price those differences separately. Put a verified one-off ventilation saving in the installed cost and any verified running-cost difference in annual savings. Use the installed difference once. If annual net savings are zero or negative, the savings-based formula produces no finite payback.

What to compare on the two quotes

  • Throughput. Racks per hour by cycle with recovery active, usable opening height, rack size and the loading layout for plates, glasses and trays.
  • Water and energy. Inlet temperature, pressure and water quality limits, rinse water per rack, wash and idle energy, booster requirements and electrical connection.
  • Room and installation. Confirm the model’s exhaust arrangement, general room ventilation, condensate or drain connections and maintenance access. Have the project team confirm these requirements for the site before costing the installation.
  • Service. Ask who handles commissioning, descaling and heat-exchanger cleaning, which parts are locally available, and what the supplier includes in the installed price.

For a replacement, ask the kitchen team to log one representative week of rack counts. For a new hotel, estimate the load separately for each outlet and for overlapping banquet returns. Share both the daily total and the busiest return window with the supplier.

Questions buyers ask

Can a heat recovery dishwasher run on cold water?

Some configurations accept a cold-water connection. Match the offered model’s specified inlet range and booster arrangement to the site, and use that configuration’s energy figures in the estimate.

Does it need a dedicated exhaust hood?

Check the exact model’s installation instructions and what the local project team requires for the space. Price the general ventilation and any dedicated exhaust work against that approved layout.

What if the hotel has a busy banquet room and a quiet restaurant?

Use their combined load during overlapping returns to size the wash line. Use their combined annual rack count to estimate savings. The two figures can point to different decisions.

Plan your hotel dishroom with GRACE

Send GRACE your dishroom floor plan, largest tray size, daily rack count, busiest return window and available utilities. We can compare dishwasher configurations as part of a complete hotel kitchen package, coordinate the wash area with the surrounding workflow, and quote on-site installation within the project scope. Discuss your hotel kitchen project with GRACE.

For a comparison of undercounter, door-type and conveyor machines, see the GRACE commercial dishwasher buying guide. Industry example source: 2026 Kitchen Innovation Award winners.