Sourcing & Buying Guide

Commercial Kitchen Island Suite vs Wall Cooking Line

Start with the equipment and the service route when comparing an island suite with a wall cooking line. An island puts cooks on two sides of a central block. A wall line keeps appliances on one side of the work area. The better arrangement depends on where preparation, plating, utilities and service access fit around them.

Draw both arrangements with the same equipment before choosing. Include the depth of each appliance, the proposed service space, the working aisles and doors in their open position. Then ask the equipment supplier and project designers to check the arrangement for the selected models.

Compare the same six modules in one cooking area

The sketches below use a hypothetical 6.0 × 4.8 m cooking area and six modules, each 0.8 × 0.8 m. The same 0.7 m deep preparation bench sits opposite the wall line or alongside one side of the island. For the island, the three modules in each row sit back to back with an assumed 0.2 m service allowance between them.

Wall line

Same cooking area · 6.0 × 4.8 m

Each module A–F is assumed to be 0.8 m wide and 0.8 m deep. The row is 4.8 m long.

Island suite

Same cooking area · 6.0 × 4.8 m

The dark strip is an assumed 0.2 m service allowance. The dashed box shows the open door of module D.

These are dimension studies for the cooking area. The final kitchen plan needs the actual appliances, their installation clearances, food pass, doors and other work zones. The assumed service strip and aisle dimensions are values to test with the project team.

What changes when the same modules form an island?
MeasurementWall lineIsland suite
Cooking block length6 × 0.8 = 4.8 m.3 × 0.8 = 2.4 m.
Cooking block depth0.8 m before any additional rear allowance.0.8 + 0.2 + 0.8 = 1.8 m using the assumed service strip.
Space across the room4.8 − 0.8 − 0.7 = 3.3 m between the closed fronts.4.8 − 1.8 − 0.7 = 2.3 m to divide between the two sides.
Access to utilitiesReview the route along the wall and access to each connection.Agree how services reach the centre and how the service strip remains accessible.

Check an open door on the island plan

In the island sketch, the two side gaps are 1.1 m and 1.2 m, and the block has 1.8 m at each end. Those dimensions describe closed equipment. If a door projects 0.45 m into the 1.2 m side, 0.75 m remains before allowing for a person or cart. Show that condition on the working plan. Ask the designer to review the position, aisle and door action together.

Mark where cooks collect ingredients and where finished food goes next. Trace the route from both sides of the island to the pass, then draw the return path for dirty pans. For a wall line, check which appliances and preparation positions each cook needs to reach during the same service. Use the full kitchen plan to test those routes.

Coordinate the island’s services and extraction

  1. Equipment arrangement Confirm the selected models support the proposed installation, with access to controls, cleaning points and service panels.
  2. Supply and drainage Show the proposed routes, connection positions and access for servicing. Confirm the service allowance against the actual assembly drawing.
  3. Extraction Give the ventilation designer the appliance schedule, orientation and cooking duty. Coordinate the canopy and duct route before fixing the suite position.
Three reviews to complete with the equipment supplier and project designers.

Caterplan’s cooking-suite guidance discusses island, wall and peninsula arrangements, including the central services route. Electrolux Professional’s modular planning guidance also treats utilities, access and circulation as part of selecting the arrangement. Use those points to prepare the project brief, then size the services and ventilation for the quoted equipment.

What to request with an island-suite proposal

  • A dimensioned plan showing each module and its operation side, with matching model references.
  • The overall assembly dimensions, including joining parts and the service space.
  • An installation drawing showing supply entries, connection and isolation positions, and maintenance access.
  • The proposed extraction arrangement and the appliance data used to develop it.
  • A review of delivery access, assembly on site and future appliance removal.

When the layout is agreed, use the restaurant kitchen setup checklist to coordinate the equipment schedule with site work.

Compare cooking layouts with GRACE

Share the measured room plan, menu, peak production and proposed appliances. GRACE can help compare equipment positions and configurations, and prepare the equipment information for your project’s service coordination. Discuss your kitchen layout with GRACE.

Planning references