Blast Chiller vs Process Chiller for Food Production
Where is the food when it needs to cool? A blast chiller moves cold air around trays of prepared meals. A process chiller supplies chilled fluid to equipment such as a jacketed kettle that cools sauce before portioning.
Use a blast chiller when the product cools in trays or suitable packs. Compare usable kilograms per cycle with the time each batch leaves cooking. Specify a process chiller when a kettle jacket or heat exchanger needs a chilled fluid supply. Compare cooling capacity at the required fluid temperature, flow and site conditions.
Choose the route the food will follow
| Where the product cools | Equipment to specify | Figures to confirm |
|---|---|---|
| In pans or suitable packs | A blast chiller with trays or racks that match the pack format. | Usable kg per cycle, fill depth, core temperatures and cycle time. |
| Inside a kettle or through a heat exchanger | A process chiller, plus the fluid circuit and product-side equipment. | Cooling duty in kW at design conditions, fluid temperature and flow, and required pressure at the connection. |
In a jacketed kettle designed for cooling, heat passes through the vessel wall into the circulating fluid. In an inline system, the heat exchanger transfers heat from the product to the fluid circuit. Ask the equipment supplier which interface the machine actually provides. Some lines cool a sauce in the kettle and chill other tray-packed items separately. University of Guelph reference on jacketed kettles.
Blast chilling capacity depends on when batches arrive
Compare specifications at the same starting and target product temperatures, with a comparable pack depth and loading pattern. For purchasing, ask the supplier to run the slowest-cooling item in the intended tray or pack. Record core temperatures at representative points and check the load against the cooling limits in your food safety plan. Manufacturer example of blast chilling yield per cycle.
Suppose a trial confirms that one cabinet chills 12 kg in 60 minutes in the proposed packs. It takes another 10 minutes to unload and reload. Two 12 kg loads therefore occupy 130 minutes from the start of the first cycle to the end of the second. If both loads leave cooking together, review a larger tested load, a second cabinet, or a cooking schedule that releases each load when its cooling position is ready.
Estimate process cooling duty from the fluid loop
For an existing water-cooled process, measure the mass flow and the supply and return temperatures while the line is operating at the relevant load. Estimate the heat absorbed by the fluid as mass flow × specific heat capacity × temperature rise. Use the fluid’s properties at the working conditions when the loop uses a water and glycol mix. NSW industrial refrigeration guide.
In an illustrative water loop, the flow is 0.20 kg/s and the return is 4 °C warmer than the supply. With water’s specific heat capacity approximated as 4.18 kJ/(kg·K), the measured operating point represents about 3.34 kW of cooling duty. That is the heat the fluid picks up at that point. The chiller’s electrical input is a separate figure.
For a new line, ask the kettle or heat exchanger supplier for the fluid setpoint, design flow, pressure drop and heat load across the cycle. If multiple machines share a loop, identify which steps run at the same time. Ask the chiller supplier to confirm available cooling capacity at the required leaving-fluid temperature and the highest expected temperature of the condenser air or water. Eaton guide to selecting recirculating chillers.
What to include in the equipment brief
- Product, batch weight and schedule, plus start and target temperatures and allowable cooling time for each item.
- Pack dimensions, fill depth and tray arrangement for a cabinet. For a fluid loop, include the equipment interface and the fluid conditions specified by its supplier.
- Available floor space and site utilities. Ask each supplier to state how performance will be checked with the intended product and load.
Plan the cooling step with GRACE
Send the product list, batch schedule and measured layout. GRACE can help specify blast chilling equipment and coordinate its layout with cooking, preparation and cold storage. Discuss your kitchen cooling requirements with GRACE.