Sourcing & Buying Guide

Catering Kitchen Layout for Off-Site Events

A kitchen can cook enough meals for two events and still miss a departure if both jobs need the same packing bench. Plan the space between the cooking line and the vehicle around the times each order must be packed, checked and ready to load.

Start at the vehicle departure and work back. Set a packing deadline for each event, measure the rate of a staffed packing station, and count the carriers that could be waiting together. Put clean packing and dispatch next to each other, with a separate route or controlled return window for used equipment.

Lay out the route from production to loading

Begin with the schedule for your busiest departure window. For each job, write down the menu, meal count, pack format, loading time, drive and unloading times, and what the venue can do on arrival. An event that portions food on site needs a different pack and handover setup from one receiving individual meals.

  1. Production Feed batches to packing in departure order.
  2. Packing and checks Portion, seal, label and verify the order.
  3. Clean staging and loading Group carriers by event and move them to the vehicle.
Give used carriers and utensils a separate landing at wash-up. Return them to clean storage after washing and drying.

Set aside space at the packing station for clean containers, labels and a checked order waiting for its carrier. If clean dispatch and dirty returns share a door, plan separate time windows and agree how the door and route will be cleared and cleaned between uses. Walk the route with a loaded trolley before fixing the benches. GRACE commercial kitchen layout planning guide.

Can one packing bench serve two departures?

In this example, packing starts at 11:00. Loading takes 10 minutes per event and can run alongside packing for the other job with separate staff. Assume food and packaging are ready on time. A staffed bench completes 6 checked boxes per minute in a trial that includes sealing and labelling.

Work back from each vehicle departure
EventMeal boxesDepartReady to load
A12011:3011:20
B7211:4011:30

At six boxes per minute, A takes 20 minutes and B takes 12. One bench finishes A at 11:20 and B at 11:32. B misses its loading deadline by two minutes. The bench would need to average at least 6.4 checked boxes per minute across the first 30 minutes to finish both jobs on time, with A’s earlier deadline checked separately.

Test a second staffed packing position for B from 11:15. At the same rate it would finish at 11:27, leaving three minutes before loading B. A still has no buffer. Review whether A can start earlier within its approved food handling plan, whether vehicle slots can be spread out, or whether the packing task can be simplified and retested. Verify that upstream portioning, labels and staff can support two active positions.

Count carrier positions at the busiest moment

Suppose a trial shows each transport carrier fits 20 sealed boxes of the chosen size. A needs six carriers and B needs four, rounding up. Allow for ten carrier positions if both orders could be staged at once, such as when the first vehicle is delayed and the second order is already packed. Include the trolley base, working room to sort by event and access to remove one order without shifting the other.

For bulk service, count the actual pans, including depth and lids. Carrier specifications show capacity for specific pan sizes and depths. Check loaded weight and measure the trolley at the narrowest turn before choosing storage racks or a loading route. Manufacturer example of carrier and pan capacity.

Check the food handling plan from packing through handover, including staging, travel, unloading and any wait at the venue. Select insulated or temperature-controlled equipment for the actual food, journey and operating conditions. Confirm the packed load and monitoring method in a trial. FSANZ food transport guidance.

What to send with a catering kitchen brief

  • Two or more events from the busiest departure window, with meal counts and pack formats.
  • Measured batch output, tested packing rate and planned staff at each station.
  • Carrier and trolley dimensions, concurrent carrier count and vehicle loading slots.
  • A measured plan showing holding space, clean dispatch, the return landing and available utilities.

Plan a catering kitchen with GRACE

Share your menu, departure schedule and measured plan. GRACE can develop the layout and equipment schedule, manufacture and supply commercial kitchen equipment, and arrange on-site installation within the agreed project scope. Discuss your catering kitchen layout with GRACE.